Product Details:
|
Input: | 4* HDMI 2.0 & 2* DP 1.2 (4 Of 6) | Output: | 9 HDMI 1.3 、 1 HDMI 2.0(Preview) |
---|---|---|---|
Power: | DC 12V/30W | Resolution: | 4K60 (4096x2160@60) |
HDCP: | HDCP 2.2 | Color Depth: | 24bit |
Color Format: | RGB444、YUV444、YUV422、YUV420 | Control Method: | IR、RS232、Software(windows) |
Case: | Black & IRON | Panel: | Blue & Aluminum |
Size(Product): | 437mm*177mm*45mm | Size(Package): | 540mm*290mm*110mm |
Weight(Product): | 1.5kg | Weight(Package): | 3.5kg |
Warrantly: | 1~3 Years | OEM: | Logo,Package,Software... |
The 4K60 UHD video processor newly launched by BitVisus is able to display multiple dynamic images on top of multiple screens, and simultaneously realise a maximum of 4-channel signal input switching, 9-channel output port expansion and splicing functions, and a variety of control methods for flexible application.
Ø BIT-VP-IC409Pro is a newly launched ultra-high-definition splicing processor by Bit Video, which can display multiple dynamic images on multiple screens, and simultaneously realize 4-channel signal input switching, 9-channel output port expansion and splicing Function
Ø The motherboard adopts FPGA+ multi-threaded parallel processing hardware processing architecture, anti-static design, no operating system, maintenance-free, internal self-built core computing mechanism, excellent image processing performance to avoid system crashes, hardware conflicts, viruses and other problems
Ø Supports multi-window control, which can easily realize various functions such as picture-outside-picture (POP) tile mode, picture-in-picture (PIP) overlay mode, arbitrary picture overlay, roaming, cross-screen, zoom, etc.
Ø Supports signal cropping function, which can remove black edges and crop the input signal, making the control methods of the picture more diverse. It can perfectly solve the black edge problem caused by the front-end signal, or partially amplify the signal.
Ø Supports 16 splicing modes such as horizontal screen 1x1...1x9; vertical screen 9x1...1x1; field type: 2x2, 2x3, 3x3, 2x4, 4x2...etc.
Ø Supports 4 channels of 4K*2K@60 input, each input port burns different resolutions, and supports EDID management, reading, modification and customization of EDID (Extended Display Identification Data, Extended Display Identification Data), which improves the The compatibility of the display device enables the device output signal to adapt to various applications.
Ø Support input and output rotation: input can be rotated 90°, 180°, 270°, and the first line of output can be rotated 180°
Ø Supports seamless real-time switching of signals, achieving true "0" second switching of input signals. There is no black field trouble or lag during the signal switching process. Positions can be input manually to achieve precise positioning.
Ø Supports image effect color, saturation and other parameter adjustment functions to solve the problem of color restoration of front-end signals
Ø Supports IR remote control, RS232, TCP/IP control methods, with keyboard shortcut keys for easy configuration and quick operationØWith screen freezing function and screen mirroring function, gamma mode and panel gamma mode
Ø Audio separation can be selected, audio output supports HDMI OUT 1 or ALL ON or ALL OFF
Ø Supports functions such as hot swapping, power-off memory, host computer readback, plan saving (1), etc.
Ø Low power consumption and environmentally friendly design, internal conduction heat dissipation, no need for any external heat dissipation measures, flexible installation method (optional desktop/wall hanging)
Ø Supports full-channel 24bit, RGB444 high color sampling depth, and high video image output quality.
Ø Support computers, Android boxes, game consoles and other devices as input sources
Mainly used in ultra-high-definition video surveillance, ultra-large screen walls, large advertising screens in stores, large exhibition screens and other industry applications.
Full screen display Any splicing
Any splicing Copy left and right
Any superposition Window rotates 180°
Window rotates 270° rotate window 90°
Diagram | BIT-VP-U1-IC409Pro | |
Input interface type | HDMI 2.0x4,DP 1.2x2 | |
HDCP | 2.2 | |
Input interface maximum video pixel frequency | 600MHz | |
Maximum resolution | 4096x2160@60Hz | |
Input color depth | 24bit | |
Colour format | RGB444, YUV444,YUV422,YUV420 | |
Output interface type | HDMI 1.3x9 (≤15m),HDMI 2.0x1(LOOP,Not available by default, optional) | |
Output interface maximum video pixel frequency | 165MHz | |
Output resolution | 1920x1080@60Hz/1920x1200@60Hz | |
Control method | infrared remote control, serial port RS232, PC host computer | |
Power supply | DC 12V/5A | |
Power consumption | 30W | |
Storage/working temperature | -10~50ºC/0~80ºC | |
Shell material | All iron, all aluminium options | |
Product Size | LxWxH: 437mmx177mmx45mm | |
Package Size | LxWxH: 540mmx290mmx110mm | |
Net Weight | 2.2KG (iron), 1.5KG (aluminium) | |
Package weight | 3.7KG (iron), 3.1KG (aluminium) | |
Accessories list: | 12V/5A power supply x1, IR receiver head x1, remote control x1, certificate of conformity x1, warranty card x1, network cable x1, HDMI or DP cable x1, USB to RS232 serial cable (optional) | |
After-sales warranty | After-sales service 3-year warranty |
Positively:
The back:
Ø Input sources are connected to the IN port of the device, up to 4 input sources.
Ø The devices HDMI OUT 1-9 are connected to the large screen in sequence, first from left to right, and then from top to bottom.
PIC:remote control panel
Remote control | Button function |
180°/1x1 | Output rotation 180°/single display mode (all output images are consistent) |
row+ | Set splicing mode: row (range: 1-9) |
Col+ | Set splicing mode: column (range: 1-9) |
1Win | Input is single channel |
2Win | Input is dual channel |
3Win | Input is three channels |
4Win | Input is four channels |
↑ | Move window up |
← | Move window left |
↓ | Window moves down |
→ | Move window right |
ZOOM+ | window magnification |
CH1 | Select CH1 window |
CH2 | Select CH2 window |
CH3 | Select CH3 window |
CH4 | Select CH4 window |
90°/270° | rotate the selected window screen 90°/270° |
Output resolution switching (1080P/1200P switching) | |
Toggle audio for selected window |
Pivot | Clarification |
1 | Not yet open |
2 | Dial up for 6 seconds and then dial down to restore factory settings |
3 | Downward dialling turns on the display, upward dialling turns off the display |
4 | Down dial UDP direct connection, up dial open DHCP |
Ø Serial command: baud rate: 115200, data bit: 8 bits, stop bit: 1 bit, CRC check 1 bit
Serial port command set:rs232
Ø Connecting the Phoenix terminal of the RS232 control port to the controller (host computer, touch screen, etc.) by using a serial cable.
Ø After connecting the product and the controller through the serial cable, double-click to open the software of the host computer.
Ø Click Open Serial Port to select the serial port side of the controller.
Ø Performs control operations of the host computer.
Ø Connect the product to your computer via RJ45 cable.
Ø Set the IP address of the controller to 192.168.1.*** (the IP address of the lower unit is 192.168.1.192)
Ø Open the software of the host computer, click the refresh button to refresh the computer network card, and select the network card connected to the device 9)
Ø Click on the Find Devices button, the connected devices appear in the table, mouse to select the device you want to connect.
Ø Click the Connect Device button, the upper unit automatically starts to synchronise the lower unit's data.
Ø Connect the product and the computer through the RJ45 network cable.
Ø Make sure the fourth position of the product's dip switch is in the downward dialling state.
Ø Set the IP address of the controller as 192.168.1.**** (the IP address of the lower computer is 192.168.1.192)
Ø Open the software of the upper computer, click the Refresh button to refresh the computer NIC and select the NIC connected to the device;
Ø Click the Find Device button, the connected devices appear in the table, mouse to select the device you want to connect;
Ø Double click the IP address or Mac address, the input box can appear, you can modify IP here.
Ø IP modification supports IP of all network segments, please note that the first three digits of MAC modification should be even.
Ø MAC/IP modification have memory function, but IP will be overwritten in DHCP mode.
Ø Connect the product to the router via RJ45 cable;
Ø Connect the host PC to the router through the RJ45 network cable, and make sure the host computer turns on the DHCP mode;
Ø Dial up the fourth position of the dip switch to open DHCP mode;
Ø Confirm that there is no device with the same MAC in the current LAN (note that two devices enter the network at the same time);
Ø Click Find Device button, the connected devices appear in the table, mouse to select the device you want to connect.
Keyboard key | Function |
⬆ | Move the current item up 10 pixels |
⬇ | Move the current item down 10 pixels |
⬅ | Move the current item to the left by 10 pixels |
➡ | Move the current item to the right by 10 pixels |
Page UP | Current item enlarged by 1% |
Page | Current item shrinks by 1% |
Home | The current item is placed on the previous level |
End | The current item is placed on the next level |
TAB | switches the current item 1➡2➡3➡4➡1 |
R | rotate 90° counterclockwise |
1 | Switch to input source 1 |
2 | Switch to input source 2 |
3 | Switch to input source 3 |
4 | Switch to input source 4 |
Shift+Function key | fine adjustment (1 pixel adjustment 0.1%) |
Ctrl + Function key | coarse adjustment (100 pixels adjustment 10%) |
Ctrl+wheel | Operation area adjustment (zoom in and out) |
Shift+1~0 | Preview Window Quick App 1~10 |
Ø Right mouse click on input source, enter custom name, right click on save
Ø All input sources support customisation
Ø It is recommended to control within four characters
Ø Select IN1/2/3/4 in the input source column, long press and drag to the corresponding window to complete the selection of input source in the window
Ø Select the window, right-click the mouse, and place the pointer on the input source to select input source 1/2/3/4
Ø You can also use the keyboard numbers 1/2/3/4 to complete the signal source switching after selecting the window.
Ø Current window, when you can't get the focus of the window quickly, you can switch to the target window directly.
Ø Select the window, use the mouse to drag the four corners of the window, you can adjust the size and position of the window.
Ø Select the window that needs to be adjusted, the upper left corner of the window is the origin, enter the XY coordinates in the coordinate column to adjust the position of the window.
Ø In the Size column, enter the width and height values of the window to adjust the size of the window.
Ø In the Crop column, the resolution in the box is the input resolution of the current window, input the XY coordinates of the start and end, or drag the mouse to the size of the red box, you can complete the crop.
Ø Right-click the input source window, you can complete the custom input source naming, this function will not affect the operation area of the window logo.
Ø Right-click the operation area to wake up the menu interface.
Ø Audio Follow-Out: Assign the currently selected audio port to the output port, you can choose to disable, only 1 port, all ports open
Ø 180 degree rotation of the first row: available in row 2 of the stitching mode, rotate the first row of the screen by 180 degrees.
Ø Setting level: top/up/down the window of the current area.
Ø VideoGen Mode: If none of the input sources are enabled successfully, the output will be black screen.
Ø Rotate: rotate the current window screen by 90/180/270 degrees, you can also use the shortcut key R to do this.
Ø Adaptive Fill: currently disabled
Ø Close Window: that is, close the current window, you can right-click on the blank area to create, you can also open the display window in the subsequent "window adjustment" to open.
Ø Double click zoom: double click will zoom the window according to the grid.
Why is there no image output when the HDMI cable is connected?
Answer: It may be that the device does not detect the HDMI signal. Try re-plugging and unplugging the HDMI cable, or powering off again to return to normal.
Network port connection failed?
Answer: Observe whether the link light (green light) of the network port is always on. If it is not on, try replugging and unplugging the network port or changing the network cable.
When multiple input sources are plugged in, some input ports do not come out?
Answer: Check whether you are using an adapted power supply with sufficient power. This problem will not occur if you use the power supply shipped by our company by default.
Contact Person: Mr. Wei